Cleaning Your Air Duct System

Air ducts are primarily used in ventilation, hvac air con in order to remove and deliver air. Such important airflows include exhaust air, supply air and return air.

When used to be a part of influx of air, air ducts deliver ventilation air. They’re one way to ensure thermal comfort as well as indoor air quality.

Air ducts are made from a wide range of materials. Duct systems are traditionally made out of metal sheets that are installed first then lagged using an insulation which is really secondary operation.Those created from panels with rigid insulation aren’t required any more insulation and are often installed as single fix.

Pre-insulated aluminum ductwork has installation speed and is actually light weight. Special or custom shapes of ducts may be fabricated easily directly into site. Duct boards panels product of fiberglass provide a built-in thermal insulation. Their interior surfaces are designed to absorbs sound and in consequence helps to provide a quite operation for the duct system.

Fabric ducting is also referred to as duct socks, air socks and even textile ducts. They are created to ensure even distribution of air through the entire whole length.Fabric ducts are often made from a special polyester material. They can provide air to an area within the more effective way compared to a duct system that is conventionally exposed.

A fabric duct is never designed for being duct of conditioned air. Because it replaces metal or hard ductwork, it is commonly perceived for being duct. However, they are available with venting to permit even distribution of air along any other system’s length and hence provide a distribution and blending, which is certainly more even, of conditioned air specifically space.

There are actually applications for cloth ducts that are available in the raise floor applications. Depending with the company, they come in custom and standard colors as well as options for screening. They also may become visible in non-porous or porous fabric.

An aura permeable could be recommended if metal ducts would require it doesn’t need to be installed in a confirmed installation since it won’t form condensation on its surface. It may therefore be taken in applications which require be supplied underneath of the dew point.

A porous material requires lesser maintenance when compared to the non-porous material since it repels airborne contamination such as dust.

What is to be seen in your air ducts system?

A duct system comprises several components that includes the ducts, vibration isolators, volume control Dampe, smoke/fire dampers, plenums and immediately take-offs. A few of these components are explained below:

– Vibration isolators:

These tend to be flexible sections of duct system. They are normally installed into the operating system immediately after and before the handler.

– Volume control dampers:

This will aide to adjust the air-flow volume to the other parts of this duct system.These dampers may be fixed throughout the duct itself and may be automatic or manual.

– Smoke/fire dampers:

They are located in the machine where the duct passes through a hearth curtain or maybe a firewall. They are automated by way of an Actuator, a mechanical motor.

A probe that is linked with the Actuator detects smoke in the ducts system that’s extracted a little distance from room. The actuator causes the motor to release plus the smoke damper closes automatically until it is reopened manually.

To find out more about air ducts, contact USA Air Care who will perform Air Duct Cleaning, Contact us at (800) 460-2963. Don’t delay–call today!

Categorised in: Air Duct Cleaning, Blog

This post was written by USA Air Care